The process for enabling SSL for your main site varies depending on the type of Multisite you have.
SSL can be enabled for the main network site by using the SSL tab.
If the DNS for your domain is properly configured to point to your server’s IP address then a certificate will be issued and SSL will be enabled for the site.
If you get an error, check the WPCloud Deploy->SSH LOG screen for a complete transcript of the action.
Important: You cannot use the SSL TAB to enable SSL for a subsite. Instead, use the SSL options under the Multisite tab!
SSL can be enabled under the MULTISITE tab.
If the DNS for your domain is properly configured to point to your server’s IP address then a certificate will be issued and SSL will be enabled for the site.
If you get an error, check the WPCloud Deploy->SSH LOG screen for a complete transcript of the action.
You can set up a special entry in the CloudFlare DNS screen to automatically route all subdomains to your Multisite install. Setup an A record and use “*” as the name.